Determination of total iodine in samples with an organic matrix by solid-phase spectrophotometry

A solid-phase spectrophotometry method is proposed for determining total iodine in samples with an organic matrix. The method involves the sorption of I₂ formed in oxidation of iodide with oxone (active ingredient potassium peroxomonosulfate) by polyurethane foams, followed by the registration of the adsorbent absorbance at 360 nm. Sample preparation includes treatment with an aqueous methanolic solution of tetramethylammonium hydroxide followed by thermostation at 90 ± 2°C for 3 h. The detection limit for iodine calculated using the 3s-test is 0.03 μg in a sample aliquot portion of ≤8 cm³. The relative standard deviation is 8–12% for iodine concentration in the range 0.3–5.0 μg/g.     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

Predicting noise from aircraft operated on the ground

Averaged data for sound levels due to aircraft engine testing out to a distance of 3 km obtained under low wind speed conditions are presented. Predictions of standard analytical approximations are compared with these averaged data. The measured average sound levels are shown to be consistent with the predicted influence of ground effect including impedance discontinuities. There is a noticeable influence of directionality also.     

Xylenol orange adsorbed on silica surface as a solid phase reagent for lead determination using diffuse reflectance spectroscopy

The solid-phase reagents on the base of xylenol orange and its complex with Fe(III) immobilized on silica surface were obtained. The interaction of Pb(II) with developed reagents was studied. The conditions of quantitative recovery of Pb(II) from diluted solutions, such as acidity of aqueous phase, the amount of the sorbent, the volume of solutions and the time of equilibrium reaching, were examined. The tolerance limits of metal ions in the sorption of Pb(II) at pH 4.5-5.5 are reported. The capabilities of immobilized xylenol orange for Pb(II) pre-concentration prior to its diffusion reflectance spectroscopic detection was evaluated. The detection limit was 2 mug l(-1). The developed method was applied to Pb(II) determination in natural water and foodstuffs.     

Mechanochemical synthesis of nonstoichiometric nanocrystals La1 ? yCayF3 ? y with a tysonite structure and nanoceramic materials from CaF2 and LaF3 crystals

The nonstoichiometric phases La_{1 − y} Ca _y F_{3 − y} (y = 0.15, 0.20) with a tysonite (LaF₃) structure have been prepared for the first time by the mechanochemical synthesis from CaF₂ and LaF₃ crystals. The average size of coherent scattering regions is approximately equal to 10–30 nm. It has been shown that the compositions of the phases prepared by the mechanochemical synthesis are inconsistent with the phase diagram of the CaF₂-LaF₃ system. The “mechanohydrolysis” of the La_{1 − y} Ca _y F_{3 − y} phase has been observed for the first time. Under these conditions, the La_{1 − y} Ca _y F_{3 − y} phase partially transforms into lanthanum calcium oxyfluoride for a milling time of 180 min with intermediate sampling. The La_{1 − y} Ca _y F_{3 − y} nanoceramic materials have been prepared from a powder of the mechanochemical synthesis product by pressing under a pressure of (2–6) × 10⁸ Pa at room temperature. The electrical conductivity of the synthesized materials at a temperature of 200°C is equal to 4.9(6) × 10⁻⁴ S/cm, and the activation energy of electrical conduction is 0.46(2) eV. These data for the nanoceramic materials coincide with those obtained for migration of fluorine vacancies in single-crystal tysonite fluoride materials. Original Russian Text ? B.P. Sobolev, I.A. Sviridov, V.I. Fadeeva, S.N. Sul’yanov, N.I. Sorokin, Z.I. Zhmurova, I.I. Khodos, A.S. Avilov, M.A. Zaporozhets, 2008, published in Kristallografiya, 2008, Vol. 53, No. 5, pp. 919–929.     

The Potency of Seaweed Sulfated Polysaccharides for the Correction of Hemostasis Disorders in COVID-19

Hemostasis disorders play an important role in the pathogenesis, clinical manifestations, and outcome of COVID-19. First of all, the hemostasis system suffers due to a complicated and severe course of COVID-19. A significant number of COVID-19 patients develop signs of hypercoagulability, thrombocytopenia, and hyperfibrinolysis. Patients with severe COVID-19 have a tendency toward thrombotic complications in the venous and arterial systems, which is the leading cause of death in this disease. Despite the success achieved in the treatment of SARS-CoV-2, the search for new effective anticoagulants, thrombolytics, and fibrinolytics, as well as their optimal dose strategies, continues to be relevant. The wide therapeutic potential of seaweed sulfated polysaccharides (PSs), including anticoagulant, thrombolytic, and fibrinolytic activities, opens up new possibilities for their study in experimental and clinical trials. These natural compounds can be important complementary drugs for the recovery from hemostasis disorders due to their natural origin, safety, and low cost compared to synthetic drugs. In this review, the authors analyze possible pathophysiological mechanisms involved in the hemostasis disorders observed in the pathological progression of COVID-19, and also focus the attention of researchers on seaweed PSs as potential drugs aimed to correction these disorders in COVID-19 patients. Modern literature data on the anticoagulant, antithrombotic, and fibrinolytic activities of seaweed PSs are presented, depending on their structural features (content and position of sulfate groups on the main chain of PSs, molecular weight, monosaccharide composition and type of glycosidic bonds, the degree of PS chain branching, etc.). The mechanisms of PS action on the hemostasis system and the issues of oral bioavailability of PSs, important for their clinical use as oral anticoagulant and antithrombotic agents, are considered. The combination of the anticoagulant, thrombolytic, and fibrinolytic properties, along with low toxicity and relative cheapness of production, open up prospects for the clinical use of PSs as alternative sources of new anticoagulant and antithrombotic compounds. However, further investigation and clinical trials are needed to confirm their efficacy.     

Electron diffraction study of ordering in the Er0.715Ca0.285F2.715 tysonite phase

The structure of Er_0.715Ca_0.285F_2.715 crystals as grown from the melt (without heat treatment) has been studied by electron microscopy. It is found that the structure is inhomogeneous, consisting of an ordered tysonite matrix with the hexagonal crystal structure (supercell reflections exhibit the vector 1/8〈203〉 in the units of small tysonite cell), in which crystallites of the other laminar phase with layers ～10 Å thick are incorporated.     

Readout system of TPC/MPD NICA project

Physics of Atomic Nuclei - The time-projection chamber (TPC) is the main tracking detector in the MPD/NICA. The information on charge-particle tracks in the TPC is registered by the MWPG with...     

Effect of high-energy electron irradiation in an electron microscope column on fluorides of alkaline earth elements (CaF2, SrF2, and BaF2)

The effect of high-energy (150 eV) electron irradiation in an electron microscope column on crystals of fluorides of alkaline earth elements CaF₂, SrF₂, and BaF₂ is studied. During structural investigations by electron diffraction and electron microscopy, the electron irradiation causes chemical changes in MF₂ crystals such as the desorption of fluorine and the accumulation of oxygen in the irradiated area with the formation of oxide MO. The fluorine desorption rate increases significantly when the electron-beam density exceeds the threshold value of ∼2 × 10³ pA/cm²). In BaF₂ samples, the transformation of BaO into Ba(OH)₂ was observed when irradiation stopped. The renewal of irradiation is accompanied by the inverse transformation of Ba(OH)₂ into BaO. In the initial stage of irradiation of all MF₂ compounds, the oxide phase is in the single-crystal state with a lattice highly matched with the MF₂ matrix. When the irradiation dose is increased, the oxide phase passes to the polycrystalline phase. Gaseous products of MF₂ destruction (in the form of bubbles several nanometers in diameter) form a rectangular array with a period of ∼20 nm in the sample.     

Spectrophotometric determination of oxyhalides with N,N-diethylaniline

We have developed procedures for the spectrophotometric determination of ClO^?, BrO ₃ ^? , and IO ₃ ^? in waters of different origin. The procedures are based on the oxidation of N,N-diethylaniline in acidic media and their detection limits (by 3s criterion) are 0.04, 0.18, and 0.53 ??g/mL, respectively. The calibration curves are linear in the concentration ranges 0.1?C2.0, 0.4?C12.5, and 1.6?C40 ??g/mL, respectively. The procedures provide simple and rapid determination of these analytes.